CP Pistons piston and ring set for B18 – SC7019-4

CP Pistons Forged Piston & Ring Set 85 mm Bore +1.0 mm 9.7:1 for Honda Integra Civic B18C1

$885.15 USD
Skip to product information
CP Pistons piston and ring set for B18 – SC7019-4

CP Pistons Forged Piston & Ring Set 85 mm Bore +1.0 mm 9.7:1 for Honda Integra Civic B18C1

SC7019-4
$885.15 USD

CP Pistons' forged piston and ring set for the Honda B18 (B18C1) has an 85 mm bore, a +1.0 mm size and a 9.7 compression ratio. It suits B18 rebuilds where the block is bored to 85 mm. Part number SC7019-4.

Key features

  • Forged, with rings: sold as a piston and ring set.

These 85 mm forged CP pistons only go as far as the block holding them. An EPOXY54 kit for the B18 gives the block closed-deck strength without machining, with 21,000 psi compressive strength and a DIY install in 5 steps.

Fitment

Fits Honda B18. Confirm your vehicle below, or match by part number SC7019-4 before ordering.

Year Make Model Submodel
1997 Acura Integra GS
1994-1997 Acura Integra GS-R
1994-1997 Acura Integra LS
1994-1997 Acura Integra RS
1995-1996 Acura Integra Special Edition
1997 Acura Integra Type R
1988-1991 Honda Civic Base
1992-2000 Honda Civic CX
1988-2000 Honda Civic DX
1990-2000 Honda Civic EX
1998-2000 Honda Civic GX
1996-2000 Honda Civic HX
1988-2000 Honda Civic LX
1988-1991 Honda Civic RT 4WD
1989-1995,1999-2000 Honda Civic Si
1999 Honda Civic Value Package
1992-1995 Honda Civic VX
1988-1989 Honda Civic Wagovan
1993-1997 Honda Civic del Sol S
1993-1997 Honda Civic del Sol Si
1994-1997 Honda Civic del Sol VTEC
1989-1991 Honda CRX Base
1988 Honda CRX DX
1988-1991 Honda CRX HF
1988-1991 Honda CRX Si
SC7019-4

You may also like