Eagle Extreme Duty H-Beam Connecting Rod, Single, 5.394 in. for Honda D16
Eagle's Extreme Duty forged 4340 H-Beam connecting rod for the Honda D16 is sold as a single rod, part CRS5394HXD-1. It suits D16 builders who need one replacement rod, or who are assembling a set one rod at a time. Eagle lists it for the most extreme applications.
Key features
- Forged 4340 steel H-Beam: made from a two-piece forging, then fully machined, shot-peened and polished.
- ARP Custom Age 625+ bolts: 3/8 in. fasteners, torqued to 60 ft-lbs with ARP moly lube only.
- 5.394 in. center-to-center length: the length is stated for this exact part number.
- Bushed for a full-floating piston pin: the pin size is 0.748 in.
- Held to exact tolerances: Eagle controls the sizing on these rods.
Specifications
| Brand | Eagle |
|---|---|
| Part number | CRS5394HXD-1 |
| Engine | Honda D16 |
| Quantity | Single rod |
| Material | Forged 4340 steel, H-Beam |
| Center-to-center length | 5.394 in. |
| Bolts | 3/8 in. ARP Custom Age 625+ |
| Bolt torque | 60 ft-lbs, ARP moly lube on threads |
| Pin size | 0.748 in. |
| Pin end width | 0.716 in. |
| Rod journal | 1.771 in. |
| Housing bore | 1.89 in. |
| Big end width | 0.892 in. |
| Typical weight | 535 g |
Forged internals only go as far as the block holding them. An EPOXY54 kit for the D16 gives the block closed-deck strength without machining, with 21,000 psi compressive strength and a DIY install in 5 steps.
Fitment
Fits Honda D16. Match by part number CRS5394HXD-1 before ordering.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or reproductive harm. For more information, go to www.P65Warnings.ca.gov.
