Eagle connecting rod for Honda K24 – CRS5984KXD-1

Eagle Extreme Duty H-Beam Connecting Rod (Single) 5.984 in for Honda K24

$253.99 USD
Skip to product information
Eagle connecting rod for Honda K24 – CRS5984KXD-1

Eagle Extreme Duty H-Beam Connecting Rod (Single) 5.984 in for Honda K24

CRS5984KXD-1
$253.99 USD

Eagle's Extreme Duty forged 4340 H-beam connecting rod is a single 5.984 in rod for the Honda K24. Sold one at a time, it suits a K24 builder who needs to replace a single rod or assemble a set to a chosen weight. Eagle recommends it for the most extreme applications.

Key features

  • Forged 4340 steel H-beam: forged from a two-piece forging, the way Eagle builds its H-beam rods.
  • Finished surface: fully machined, shot-peened and polished.
  • 3/8 in ARP Custom Age 625+ bolts: Eagle specifies ARP Custom Age 625+ cap bolts for this rod. Torque them to 60 ft-lbs with ARP moly lube only.
  • Bushed for a full-floating pin: the pin end takes a 0.866 in piston pin.
  • Held to exact tolerances: Eagle sizes the rod to tight tolerances, so it arrives ready for assembly.

Specifications

Brand Eagle
Part number CRS5984KXD-1
Engine Honda K24
Material Forged 4340 steel
Beam style H-beam
Quantity Single rod
Center-to-center length 5.984 in (152 mm)
Pin size 0.866 in
Pin end width 0.779 in
Big end width 0.779 in
Housing bore 2.008 in
Rod journal 1.889 in
Bolts 3/8 in ARP Custom Age 625+
Typical weight 555 g

Forged internals only go as far as the block holding them. An EPOXY54 kit for the K24 gives the block closed-deck strength without machining, with 21,000 psi compressive strength and a DIY install in 5 steps.

Fitment

Fits Honda K24. Match by part number CRS5984KXD-1 before ordering.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or reproductive harm. For more information, go to www.P65Warnings.ca.gov.

CRS5984KXD-1

You may also like