Eagle connecting rod for EJ20 – CRS5137SXD-1

Eagle Extreme Duty 4340 H-Beam Connecting Rod (Single) 5.137 in for Subaru EJ20 and EJ25

$253.99 USD
Skip to product information
Eagle connecting rod for EJ20 – CRS5137SXD-1

Eagle Extreme Duty 4340 H-Beam Connecting Rod (Single) 5.137 in for Subaru EJ20 and EJ25

CRS5137SXD-1
$253.99 USD

Eagle's Extreme Duty H-beam connecting rod is a single forged 4340 steel replacement for the Subaru EJ20 and EJ25, with a 5.137 in center-to-center length. Eagle recommends it for the most extreme applications. Buy one to replace a single rod, or order several to build a full set.

Key features

  • Two-piece forging: the rod is forged in two pieces, then fully machined, shot-peened and polished.
  • ARP Custom Age 625+ bolts: 3/8 in fasteners. Eagle says to torque them to 60 ft-lbs using ARP moly lube only.
  • Bushed for a full-floating pin: the small end is bushed for a full-floating piston pin.
  • Weight: typical weight is 530 g. Eagle's page says to specify the weight you need when ordering.

Specifications

Brand Eagle
Part number CRS5137SXD-1
Engine Subaru EJ20, EJ25
Material Forged 4340 steel
Beam H-beam
Rod length 5.137 in (center to center)
Wrist pin 0.906 in
Quantity 1 (single rod)
Rod journal 2.047 in
Housing bore 2.165 in
Big end width 0.842 in
Pin end width 0.842 in
Typical weight 530 g
Bolts 3/8 in ARP Custom Age 625+

Forged internals only go as far as the block holding them. An EPOXY54 kit for the EJ20 gives the block closed-deck strength without machining, with 21,000 psi compressive strength and a DIY install in 5 steps.

Fitment

Fits Subaru EJ20 and EJ25. Match by part number CRS5137SXD-1 before ordering.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or reproductive harm. For more information, go to www.P65Warnings.ca.gov.

CRS5137SXD-1

You may also like