HKS Step 1 High Comp 2.5L Stroker Piston Full Kit for Subaru FA24
21004-AT008
$4,200.00 USD
HKS's Step 1 high-compression stroker kit takes the Subaru FA24 from 2,387 cc to 2,498 cc with a 90 mm stroke. It bundles a forged piston kit, I-beam connecting rods and a forged crankshaft, and HKS positions it for builds that add a supercharger and need more bottom-end strength.
Key features
- A2618 pistons: the alloy holds strength at high temperature to protect the second land. It also allows a low pin height, so no service holes are needed.
- Direct-injection crown design: a cavity in the piston head helps atomize the fuel, and the 3D crown shape sustains tumble flow. The uneven head shape leaves room for a high-lift camshaft.
- Dedicated long-stroke rods: split-type I-beam rods with an optimized bolt size. The crank pin is sized to suit, so the engine side needs no modification.
- No machining required: HKS lists boring, honing and full-flow modification as not required.
- Compression by gasket: with the stock head, compression is 12.2:1 on the stock 0.6 mm gasket, 11.8:1 with an 0.8 mm HKS grommet-type gasket, and 11.3:1 with a 1.2 mm one.
Specifications
| Brand | HKS |
|---|---|
| Part number | 21004-AT008 |
| Engine | Subaru FA24 |
| Bore | 94 mm |
| Stroke | 90 mm (stock 86 mm) |
| Compression ratio | 12.2:1 (stock head, 0.6 mm gasket) |
| Displacement | 2,498 cc (stock 2,387 cc) |
| Material | A2618 pistons, forged crankshaft |
| Configuration | Forged piston kit, I-beam connecting rods, forged crankshaft |
Forged internals only go as far as the block holding them. An EPOXY54 kit for the FA24 gives the block closed-deck strength without machining, with a DIY install in 5 steps.
Fitment
Fits Subaru FA24. Match by part number 21004-AT008 before ordering.
