Manley Platinum Series Piston Set 92mm Bore 8.5:1 Dish for Subaru WRX EJ20 (2002–2005)
Manley's Platinum Series forged piston set gives the Subaru EJ20 a standard 92 mm bore and 8.5:1 compression with a dish crown. These are the EJ205 pistons for WRX rebuilds that call for 2618 alloy forgings in place of cast. The set is the standard-bore size, with rings included.
Key features
- 2618 alloy forgings: Manley machines these pistons from domestic 2618 alloy forgings.
- Cam and barrel skirt profiles: the skirt shape is meant to make power while staying easy on the cylinder walls.
- Single-setup machining: skirt turning and ring groove machining happen in one operation, which keeps the ring groove square to the skirt.
- Controlled ring lands and grooves: Manley holds tight standards on the lands and grooves for better ring seal.
Specifications
| Brand | Manley Performance |
|---|---|
| Part number | 615000C-4 |
| Engine | Subaru EJ20 |
| Bore | 92 mm |
| Stroke | 75 mm (standard) |
| Compression ratio | 8.5:1 |
| Crown | Dish |
| Oversize | Standard |
| Material | 2618 aluminum alloy, forged (Platinum Series) |
| Quantity | 4 pistons, with rings |
Forged pistons only go as far as the block holding them. An EPOXY54 kit for the EJ20 gives the block closed-deck strength without machining, with 21,000 psi compressive strength and a DIY install in 5 steps.
Fitment
Fits Subaru EJ20. Confirm your vehicle below, or match by part number 615000C-4 before ordering.
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005 | Saab | 9-2X | Aero |
| 2002-2005 | Subaru | Impreza | WRX |
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or reproductive harm. For more information, go to www.P65Warnings.ca.gov.
